Menu
Cart
Fenix WF05E - 85 lumens - CREE XP-G2 AAA x2

Fenix WF05E - 85 lumens - CREE XP-G2 AAA x2

  • 3495
  • Save $ 500


The WF05E is on backorder!

The WF05E is made from durable aluminum, given an anti-abrasive hard-anodized finish. This light was made to be used in hazardous areas. It does not emit sparks when powered on or off, and the WF05E can handle higher and lower temperatures than a typical LED light. Fenix spared no expense making sure this light is able to go anywhere.

A few certifications to be made aware of are:

  • The WF05E will not cause combustion while in flammable areas just from turning on by clicking the tailcap switch
  • The WF05E will not cause combustion from dust or similar flammable substances in the air, or while submerged, by sweeping the beam around
  • The WF05E's aluminum body will not cause hydrogen or acetylene-filled areas to become hazardous just by being present
  • Finer details for certifications are below in the Certifications area

The WF05E shoots up to 85 lumens for 11 and a half hours, powered by 2 included AAA batteries, using a CREE XP-G2 LED. Power and mode switching is done with one tailcap switch.

Features:

  • Manufacturer's page: Fenix WF05E
  • Intrinsically safe flashlight for use in hazardous areas
  • Cree XP-G2 LED with a lifespan of 50,000 hours
  • Powered by 2 AAA alkaline batteries
  • Made of durable high-strength and oxidation-resistance aluminum
  • Premium type HAIII hard-anodized anti-abrasive finish
  • Physical reverse polarity protection, to protect from the improper battery insertion

Specifications:

  • Output modes:
    Low: 10 lumens/80hr; 59ft (18m); 77cd
    Medium: 30 lumens/35hr; 95ft (29m); 210cd
    High: 85 lumens/11hr 30min; 177ft (54m); 724cd
  • Impact resistance: 1m
  • IP Rating: 68, dustproof/waterproof to -2m
  • Dimensions:
    Length: 5.3” (134.5mm)
    Body: 0.6” (14.9mm)
    Head: 0.7” (19mm)
  • Weight: 1.3oz (38g)(excluding batteries)
  • Battery: 2 AAA alkaline batteries
  • Included: 2 AAA alkaline batteries, lanyard, spare O-ring

Certifications:

IECEx:
Ex ib IIC T4 Gb
Ex ib IIIC T130℃ Db IP66/IP68
ATEX:
II 2G Ex ib IIC T4 Gb
II 2D Ex ib IIIC T130℃ Db IP66/IP68
CSA:
Ex ib IIC T4 Gb IP66/IP68;Ex ib IIIC T130℃ Db IP66/IP68
Class I, Zone 1, AEx ib IIC T4 Gb IP66/IP68; Zone 21, AEx ib IIIC T130℃ Db IP66/IP68


We Also Recommend